|
When style and appearance are at least as important to your home as are the functions of a chimney cap, consider these architecturally striking, designer
Lattice Chimney Caps. These decorative chimney caps are for the homes for which a plain ol' chimney cap just will not do. The Lattice Chimney Caps are available below in three
finishes: copper, stainless steel, and antiqued copper verdigris. All the sizes below are 10 inches in height, so they are appropriate for flues 5 inches or less in height.
The Lattice Chimney Caps in Antiqued Copper Verdigris are made of 20 gauge copper. The Lattice Chimney Caps in Stainless Steel are constructed of 20
gauge stainless steel. And the Copper Lattice Chimney Caps are made of 20 gauge copper. If you would rather your Copper Lattice Chimney Cap maintain its new look instead of
aging as copper exposed to the elements will, you can apply the Clear Protective Copper Coating.
The hand woven lattice strips accentuate each side of these architectural chimney caps. Topped by a gently peaked "roof" that can be removed to
chimney cleaning, the rectangular sizes have a roof ridge like the one in the picture above. Square sizes have the four sides of the hipped roof meet at a single point, without the
ridge.
All the designer Lattice Chimney Caps have 3/4" stainless steel mesh inside the lattice work to provide optimum spark control. If you live in California
or an area with wildfires where 5/8" mesh is required by local code, 5/8" mesh can be substituted for the 3/4" mesh for an additional charge on any of these decorative chimney caps.
Other finishes and other sizes, including other heights, are available as Custom Lattice Chimney Caps
. E-mail us or call us (888-834-7375) for information about other
sizes or other finishes for the Lattice Chimney Caps.
To attach the Designer Lattice Chimney Caps, use the Tapcon Bit and Tapcon Masonry Fastener Kit, sold below. The corners of the Lattice
Chimney Caps terminate in one-inch wide mounting flanges.
Designer Lattice Chimney Caps are a wise investment in your home's value and curb appeal, adding decorative architectural interest. The Lattice Chimney
Caps are individually and proudly Made in America. They are shipped fully assembled. Delivery time is 14 to 28 business days, and all shipping
is FREE to the continental United States.
Copper or stainless steel Designer Lattice Chimney Caps have a Lifetime Warranty!
If you would like a chimney cap on this page shipped to Canada, call us at
888-834-7375 so we can make the arrangements for you.
NOTE that the sizes below refer to the lattice and screen enclosed area. The roof or lid of each Lattice Chimney Cap is larger.
Because each Lattice Chimney Cap is crafted when you order it,
- it will take approximately 14 to 28 business days for delivery, and
- you will want to measure carefully, as the chimney cap that is made for you is not returnable unless there is a factory defect.
|
