When you demand the top-of-the-line, you want the Gelco Copper Chimney Cap.
Nothing compares to a Copper Chimney Cap! As these Gelco Copper Chimney Caps become
weathered, they take on a unique, "antiqued" appearance that further enhances their beauty. If, however, you would rather keep the beautiful glow of new copper, our Protective Coating, below, provides the perfect solution.
Masonry anchors (special Tapcon screws) are included with these chimney caps at no extra cost! If you would rather use Chimney Cap Adhesive, we also have it available.
The Gelco Copper Multi-Flue Chimney Caps have an electroplated copper-on-stainless base, and the rest of the chimney cap is solid copper.
The Gelco Copper Multi-Flue Chimney Cap is available in four sizes, all with 8" tall mesh, and
all come with alifetime warrantyon manufacturer's defects and rust, regardless of what type of fuel is used. Features the traditionally fine workmanship of all Gelco
chimney caps, such as the special cross break that gives the chimney cap lid extra strength and durability.
To assure safety and proper chimney draw, the chimney cap you select should be at least 5 inches taller
than your tallest flue. Since all of the Gelco Copper Multi-Flue Chimney Caps have an eight
inch tall screen, these chimney caps are not appropriate if your tallest flue is more than 3 inches tall. If you need a taller chimney cap, consider either the Gelco Stainless Multi-Flue Chimney Caps with 12" or 16" tall screens or the Whitecaps Multi-Flue Chimney Caps available with 8", 10", 12", 14" and 16" tall screens in copper or stainless steel.
Note: Copper chimney caps, including the Gelco Copper Chimney Cap, should not be used on light colored masonry. Copper chimney caps may stain surrounding light colored areas over time.
FREE Shipping to the continental U.S. applies to all of these fine Gelco Copper Chimney Caps.
When you want the quality of a copper chimney cap, but would prefer the glow of new copper to the
weathered, "antiqued" look of aged copper, 421 Clear Protective Copper Coating spray is your answer. The picture to the left shows the difference between a section of a
copper cap protected with 421 Clear Protective Coating and the rest of the cap that was unprotected for six months. The acrylic, water resistant base provides protection to your
copper chimney caps without yellowing or staining.
Note: Over time, the sun's UV rays will break down this coating. Reapplications may be necessary. One can provides
multiple applications. 12 oz. can of 421 Clear Protective Copper Coating
