Outside Mount Chimney Caps that Fasten to the Chimney
Custom Made for Your Single or Multi-Flue Chimney
While many multi-flue chimney caps mount to the cement crown on top the the chimney, the Stainless Steel or Aluminum Band-Around Chimney Caps
instead attach to the outside sidesof the chimney
itself. This style gives maximum protection to your chimney crown, protecting the whole thing from deterioration. The Outside Mount Band-Around Chimney Caps attach snugly with no need to drill into your chimney or chimney crown or to apply a chimney cap adhesive.
The Outside Mount Band-Around Chimney Caps fasten to your chimney with a 2.25 inch wide band at the bottom. At each corner, the band has
stainless steel nuts and bolts that allow you to get a tight, secure fit.
Although shown above on a brick chimney, the Band-Around Outside Mount Chimney Caps are also appropriate for stucco, adobe, cement, or terra cotta chimneys;
flat, smooth natural stone chimneys; and wood chases.
TO MEASURE HEIGHT: To insure adequate draft for your flues, the vertical braces and
mesh screening should be at least 6 inches taller than from the top of the first row of chimney bricks to the top of tallest flue. If this measurement is
from zero to 3.5 inches tall, 9 inch braces are needed;
from 3.5 to 6 inches tall, 12 inch braces are needed;
from 6 to 9 inches tall, 15 inch braces are needed; and
from 9 to 12 inches tall, 18 inch braces are needed.
For appropriate proportion, 12 inch vertical braces are the minimum height used for Outside Mount Band-Around Chimney Caps that are 32 inches or more in width.
TO MEASURE BAND
for an Outside Mount Band-Around Chimney Cap, first measure the longest side of the chimney. Then, in a clockwise sequence,
measure the other sides of the chimney.
Each Outside Mount Band-Around Chimney Cap is custom made just for your chimney, so
please measure carefully as they are non-refundable unless damaged in shipment to you.
Outside Mount Band-Around Chimney Caps can be made for you in either aluminum or stainless steel. See the comparison chart below.
Call us at 888-834-7375 or e-mail us for more information or for a price quote for the custom sized Outside Mount Band-Around Chimney Caps you need. Our friendly Chimney Cap Specialists can answer all your questions!
SHIPPING INFORMATION: The Band-Around Chimney Caps arrive at your home or business in the United States or Canada 10 to 15
after placing your order. If you would like
a Band-Around Outside Mount Chimney Cap shipped to Canada, call us at 888-834-7375 so we can make the arrangements for you.
Comparison of Features
Stainless Steel Band-Around Chimney Caps
Aluminum Band-Around Chimney Caps
Source of Heat (Fuel)
Appropriate for all fuels
NOT appropriate for use with Oil or Coal. NOT appropriate for Wood or Wood Pellets if used as a primary source
of heat, though fine if wood or pellets are used as secondary source of heat.
Lid (or "Hood" or "Roof")
24 gauge Stainless Steel
18 gauge Aluminum
18 gauge Stainless Steel
16 gauge Aluminum
1/8" thick by 3/4" wide Stainless Steel
1/8" thick by 3/4" wide Aluminum
26 gauge Stainless Steel with Stainless Steel Nuts and Bolts
18 gauge Aluminum with Stainless Steel Nuts and Bolts
Maximum Base Size
48" wide by 96" long
60" wide by 96" long
Call 888-834-7375 or email us for a price quote on a Stainless Steel Outside Mount Band-Around Chimney Cap
Call 888-834-7375 or email us for a price quote on an Aluminum Outside Mount Band-Around Chimney Cap