|
Adding a discerning distinction to your home, the Provincial Chimney Pots are not only handmade in America but also crafted with an unparalleled attention to detail and
quality. The octagonal pot roof and the double octagonal skirts directly under the screening meld to a cylindrical chimney pot with two decorative rings, one directly under the octagonal skirts and
one midway down the cylinder, ending in a square base.
The Provincial Chimney Pots for square, rectangular or oval flues are available five stunning finishes. (The Provincial Chimney Cap can also be used with a round flue.) The Provincial Chimney Pot shown
at the top of the page has a Natural Copper Finish, and the Provincial Chimney Pots shown to the left, with two Provincial Chimney Pots on each chimney, have a Burnished
Copper Finish that has acquired a natural patina with age. To the right is a chimney with two Stainless Steel Provincial Chimney Caps. Select the copper finish (Natural Copper,
Burnished Copper, Sanded Copper, or Copper Patina) that best suits your home, or select the Provincial Chimney Pot in stainless steel.
The Provincial Chimney Pot for square, rectangular, or oval flues has a 20 inch square base. This size is suitable for flues with no dimension longer than 16 inches.
All seams on the Provincial Chimney Pots are soldered. The soldered seams assure that your chimney pots will not crack or warp. These
Provincial Chimney Pots are so well made, they can withstand high winds and earthquakes! Yet they are light enough, about 28 pounds each, to make installation easy.
The Provincial Chimney Pots are shipped to your home, carefully crated and fully assembled. FREE Shipping to continental U.S.!
We recommend attaching these chimney pots to your crown with a Tapcon Kit consisting of 12
Tapcon stainless steel screws and a Tapcon drill bit. The stainless steel Tapcon screws go through the bottom flange of the Provincial chimney pot
and into the chimney crown. The Tapcon Kit will be shipped separately from your Provincial Chimney Pot.
|